Stellenbeschreibung

• fachliche und disziplinarische Führung eines Labor-Teams, das im Auftrag von Produzenten, Händlern und Bio-Anbietern Lebensmittel auf Pestizidrückstände untersucht  
• Methodenentwicklungen an GC-MS/MS-Systemen 
• termingerechte Fertigstellung der Analysen
• Einhaltung der Qualitätsstandards nach ISO 17025 durch Teilnahme an Ringversuchen

Qualifikationen

• abgeschlossenes Bachelor- oder Masterstudium der Chemie,  der Lebensmittelchemie oder vergleichbare Qualifikation
• idealerweise erste Führungserfahrung sowie Berufserfahrung in einem analytischen Labor
• Bereitschaft zur gelegentlichen Wochenendarbeit
• sehr gute Deutsch- (C1-Nicveau) und gute Englischkenntnisse 

See more jobs at SGS

Apply for this job

Job Description

PRIMARY RESPONSIBILITIES

As a member of the team in our Global Business Solutions (GBS) center, conducts data processing in the analysis of EHS matrix samples in chemical lab. In particular, validates, calculates and reports lab results to strict quality and ethical standards.

REPORTING LINE

Operational direct reporting to Affiliate lab manager or supervisor; administrative accountability to GBS Supervisor.

SPECIFIC RESPONSIBILITIES

• At all times, complies with SGS Code of Integrity and Professional Conduct.
• Performs various data processing functions, including laboratory data calculations and integrations, quality control checks, LIMS entries, and other data management functions as required.
• Ensures lab deadlines are met and the GBS Team Coordinator (or section Lab Manager in their absence) is notified immediately if the turnaround time specified cannot be met.
• Ensures all testing methodology and quality control procedures are performed according to ISO17025 and assigned SGS lab standards where applicable.
• Keeps Affiliate Manager, GBS Supervisor and any other key Affiliate personnel informed immediately of all operational issues, including:
  • Personnel matters affecting performance,
  • Failure to meet turnaround requirements,
  • Failure to meet ISO17025, country certifications and assigned SGS lab standards where applicable,
  • Inconsistencies in quality control procedures so they may be rectified immediately,
  • Additional training requirements identified.
• Adopts and supports specific operational improvement activities as communicated by the GBS Team Lead. These projects will focus on the improvement of quality, efficiency, accreditation, communication and technical improvement.
• Maintains a working knowledge of all required analytical procedures in the section.
• Looks for efficiency gains in your section by being aware of new technologies and reviewing existing procedure.
• Able to respond to technical queries.
• Performs other related duties as may be assigned either in support of departmental goals or for his/her personal or professional training, education or development as programmed by his/her immediate superior.
• Ensures work area in GBS is kept clean and presentable at all times.
• Remains familiar with SGS quality assurance procedures.
• Complies to all SGS QHSE and HR policies and procedures.

Qualifications

PROFILE

• Minimum Bachelor of Science degree (Chemistry preferred) or other science degree related courses
• A minimum of one-year lab experience, including a minimum of 6 months HPLC, GC and/or GC-MS operating experience paired with a formal training course
• Prior experience with LIMS and Chemstation or Mass Hunter software a plus
• Experience with Data Review of lab results
• Demonstrated commitment to data quality and operational excellence

REQUIRED SKILLS

• Excellent written and verbal communication skills in English language (B2 or C1 level)
• Strong MS Excel skills
• Analytical instrumentation knowledge, particularly chromatography and mass spectrometry
• Self-motivated
• High level of integrity
• High level of technical knowledge
• Teamwork and co-operation
• Organisation and efficiency
• Taking responsibility

See more jobs at SGS

Apply for this job

Job Description

As an IVDR Product Assessor, you will use your skills as an expert in clinical diagnostic technologies to ensure that patients across Europe have access to safe and effective diagnostic tests. Join our rapidly growing team of regulatory professionals in helping the European healthcare ecosystem navigate the challenging transition to the new European In Vitro Diagnostics Regulation. 

Your role will be to assess in-vitro diagnostic medical devices for strict compliance with the relevant European laws (EU IVDR; Regulation 2017/746). You key task will be carrying out reviews of the manufacturers' technical documentation as part of the CE marking process. This will require a keen interest in and deep understanding of the product technologies being assessed, knowledge of the clinical application of the devices, as well as a keen eye for detail.

Key Responsibilities:

• Conduct technical file reviews against the EU In-vitro Diagnostics Regulation for Class A sterile, Class B and Class C devices within a defined timeframe, by verifying compliance of technical documentation submitted by manufacturers against the regulatory requirements.
• Identify, document and seek to rectify instances where device technical files deviate from compliance with applicable requirements under the IVDR.
• Provide support for CE marking activities within SGS, contribute to the training and qualification of junior staff, and develop comprehensive training materials.
• Communicate effectively with team members, clients, and other stakeholders regarding product assessments, working diligently to minimize regulatory risks associated with in vitro diagnostic device certification.
• Expand and keep up-to-date your knowledge of relevant technologies, regulations, international standards and best practice guidance documents. 

Qualifications

We are seeking an experienced candidate with:

• At least 4 years of professional experience within the domain of healthcare products or in related activities. This may include for example roles in design and development, manufacturing, auditing, relevant academic research, or work in a clinical setting.
  • Among these, a minimum of 2 years should involve direct engagement in the design, manufacture, testing or utilization of specific in-vitro diagnostic devices and technologies, or relevant scientific research
• Knowledge encompassing a range of IVR/IVS/IVP/IVD competence codes for IVDR, as defined in Commission implementing regulation (EU) 2017/2185
• Degree or equivalent qualification in a relevant technical discipline such as medicine, engineering, biomedical science, microbiology or biochemistry.
• Proficient communication skills using modern electronic platforms.
• Strong written English skills, as reports will be reviewed and queried in English.
• Demonstrated skills in independent learning.

Desirable Skills:

• Direct experience with medical device development life cycle processes, regulatory submissions and relevant standards such as ISO 13485 and ISO 14971.
• Experience with clinical studies and clinical performance evaluation of in-vitro diagnostic devices.
• A broad base of experience covering a variety of different diagnostic assay types and technologies.
• Prior experience in conducting product technical documentation assessments for another Conformity Assessment Body / Notified Body (technical file reviewer or equivalent role) would be considered advantageous.
• An in-depth knowledge of the European regulatory framework on medical devices is highly advantageous, but is not required to apply for this role as on-the-job training will be provided. 

See more jobs at SGS

Apply for this job

Description du poste

Le directeur de projet IT est responsable de la planification, de la coordination et de la gestion des projets technologiques au sein de l’entreprise. Il/elle travaille en étroite collaboration avec les équipes techniques, les parties prenantes et les fournisseurs pour assurer la livraison réussie des projets

Poste basé au Mans avec des déplacements réguliers (mensuel) à Annecy.

1. Planifier le projet : La première fonction d’un Directeur de projet est de planifier le projet dans sa globalité en établissant des objectifs clairs et des échéances précises. Pour cela, il doit identifier les tâches nécessaires à la réalisation du projet, définir les ressources nécessaires (Delivery et Métier), évaluer les risques éventuels et mettre en place un planning détaillé.

1. Élaborer des plans de projet détaillés, y compris les échéances, les ressources et les livrables en relation avec les Product Owners
2. Suivre l’avancement du projet, identifier les risques et mettre en place des mesures d’atténuation.

2. Coordination de l’équipe : Le Directeur de projet est également responsable de la coordination de l’équipe. Il doit s’assurer que chaque membre de l’équipe dispose des moyens nécessaires pour mener à bien sa mission et que les échanges entre les membres de l’équipe sont fluides. Il doit également veiller à la communication régulière des informations relatives au projet auprès de chaque membre de l’équipe.

1. Collaborer avec les équipes techniques, les départements métier et les parties prenantes pour aligner les objectifs du projet.
2. Assurer une communication fluide entre les différentes équipes.

3. Contrôler le projet : le Directeur de projet doit contrôler le projet de manière régulière pour s’assurer que les objectifs du projet sont atteints. Le Directeur de projet s’assure que les coûts, délais et qualité fixés sont respectés. Il doit donc mettre en place des outils de suivi et de reporting qui permettent de mesurer l’avancement du projet et de détecter rapidement les éventuels écarts. En cas de dérive, il doit être capable de proposer des solutions pour réaligner le projet sur les objectifs initiaux.

1. Garantir le respect du cahier des charges
2. Proposer au métier, en cours de projet, d’éventuelles modifications d’objectifs (qualité, coût, délai) liées à des contraintes de réalisation ou des modifications d’environnement

4. Déployer et clôturer le projet : le Directeur de projet doit s’assurer dans la phase finale, que la solution du projet est exploitable par les équipes en charge de la maintenance et du maintien en conditions opérationnelles (MCO)

1. Présenter la solution aux équipes en charge de la maintenance et du MCO et s’assurer de la fourniture de la documentation nécessaire.
2. S’assurer des moyens alloués pour la maintenance et le MCO de la solution
3. Clôturer le projet avec une évaluation de l’atteinte des objectifs et une enquête de satisfaction

Qualifications

Savoir être :

• Travail en équipe
• Esprit d'analyse, rigueur et organisation dans l’exécution des besoins
• Pédagogue et communiquant 
• Aisance rédactionnelle
• Esprit d’intégrité et éthique 
• Aisance relationnelle dans un environnement à forte contrainte
• Capacité d’adaptation dans un environnement changeant
• Capacité de gestion du stress et des crises lors d’événement majeur
• Forte capacité de travail, d’engagement et de persévérance

Compétences Techniques :

• Maitrise des méthodologies Agile
• Gestion de projet, de programme et de portefeuille de projets
• Maitrise des méthodes d’intégration et déploiement continu 
• Planification 

See more jobs at SGS

Apply for this job

Job Description

Primary Responsibilities:

• Provide technical support to engineering and certification staff in the areas of field labeling, certifications, and production control and monitoring.
• Participate in technical committees and industry associations to keep up to date on regulations, and update clients and laboratories with the latest changes and information.
• Support the Field Evaluation Sales Director for the Field Label Program through collaboration with Sales, Marketing, and Engineering.
• Manage the national field label team of contractors and full-time field labeling staff.

Specifically These Responsibilities Are To:

• Qualify laboratory staff to perform field label projects.
• Hire and qualify full-time/contract employees as the business needs arise
• Train and develop overseas affiliates to perform design reviews
• Oversight of the UL 508A panel shop program
• Provide interpretation of standards, codes, and regulations to support technical alignment.
• Create and deliver technical training to engineering staff.
• Conduct and/or monitor field evaluations in accordance with SGS CRS US program requirements
• Investigate supplier product quality issues and work directly with supply chain on appropriate improvement steps
• Provide solutions for continuous improvement of the client’s product, process, and quality management system.
• Assist in the preparation and presentation of customer proposals.
• Conduct and/or review machinery risk assessments.
• Issue reports and review/approve corrective actions, as needed.
• Represent SGS at external technical committee and industry meetings,
• Support Field Evaluation Sales Director with technical assistance for sales, marketing, and training for field label program. Speak at trade shows on technical topics and publish quarterly technical newsletter.
• Perform other related duties and assignments as required.
• Meet Key Performance Indicators (KPI’s)
• Execute all work with a professional manner aligned with the SGS Integrity Policy.

Qualifications

Profile of the position (Requirements & Qualifications):

• 5 years experience in the manufacturing process/production of machinery.
• 3 years experience in completing machinery risk assessments.
• Experience with NFPA 79 and UL 508A for field labeling.
• Knowledge of SPE1000
• Knowledge of Field Evaluation Body (FEB) Requirements NFPA 790 and NFPA 791.
• Experience with product safety standards, National Electrical Code and Canadian Electrical Code.
• Knowledge of the industrial automation product range and applications.
• Ability to work with a diverse range of products and applications.
• Experience with quality management systems, quality assurance, auditing is a plus.
• Experience with Lean and Continuous Improvement initiatives is a plus.
• 70% travel may be required.

Education:

• Bachelors of Science in Electrical Engineering or suitable work experience.
• Technical degree or equivalent training and work experience.

Skills/Competencies:

• Must be motivated self starter capable of working with minimal supervision.
• Ability to read/interpret technical documents and work instructions.
• Ability to write routine reports.
• Ability to speak effectively with clients.
• Excellent written and verbal communication skills.
• Proficient in Microsoft Office – Word, Excel, Outlook a must.
• Detail oriented.
• High level of integrity.
• Strong inter-personal skills.

Functional Competencies / Qualifications:

• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required.

• This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company’s rights to assign or reassign duties and responsibilities to this job at any time.

• SGS is an Equal Opportunity Employer.

See more jobs at SGS

Apply for this job

Job Description

Make an impact with SGS! Our Sales team makes a difference in the lives of our customers, colleagues and community. SGS works to ensure the health and safety of our environment and community as a key partner in the cleanup of contaminated sites, ensuring we all have safe drinking water and helping clients minimize their impact on the environment.

Our team’s goal is to provide above and beyond client service along with industry leading technical expertise and our Sales & Business Development team is an important part of that objective. If you’re looking for an exciting opportunity in an incredible work environment with a team who is constantly looking for ways to exceed the needs of our clients, then this could be the role for you.

We’re looking for a motivated and energetic individual with expertise in business development or client service and a passion for solution-based selling.

This position is responsible for the sale of environmental analytical services to existing and prospected customers, as well as securing business opportunities to meet revenue targets. 

Applying the sales process, the successful candidate will generate revenue for SGS environmental laboratories.

A day in the life of a SGS Senior Account Manager

The Senior Account Manager is responsible for the sale of environmental analytical services to existing and prospected customers, as well as securing business opportunities to meet revenue targets. The Senior Account Manager is expected to manage a portfolio of clients and build long-term relationships. Applying the sales process, the Senior Account Manager will generate revenue for SGS environmental laboratories. The Senior Account Manager will liaise between customers, Client Services team, and lab operations to meet customer needs.

Job Functions

• Identifies business leads with existing and potential customers through continuous interaction across the Environmental community.
• Proactively seeks out, intelligently targets and initiates contact with prospective customers to assess potential leads.
• Develops a network of industry contacts and continually qualifies market conditions.
• Through active probing and listening, conducts discovery sessions with qualified leads to identify client needs and determine potential opportunities for the full scope of offerings.
• Assesses client needs against capabilities of SGS.
• Works closely with prospects to develop a value proposition and determine how SGS services will help them achieve their goals.
• Influences and promotes the expansion or establishment of business opportunities through partnering relationships with potential customers and coordinated efforts with other SGS business lines.
• Secures closure on all proposals to new and existing clients and effectively hand over the contract to the Client Services Team.
• Communicates sales process activities reports to update businesses internally. Use of CRM with agreed upon KPI (Key Performance Indicators).
• Provides market intelligence to the Business Development Manager and Operations Manager to assist in developing sales materials, plans, budgets and forecasts.
• Presents and represents SGS at tradeshows and technical seminars to build SGS brand awareness and broaden the market and client base.
• Acts as the customer's advocate in interactions with the SGS organization to ensure the customer obtains the best value from the SGS offerings.
• Sets appropriate customer expectations on SGS product and service offerings.
• Represents SGS professionally and ethically in the marketplace.
• Continually develops personal selling skills, acquires industry knowledge, broadens expertise in environmental service offerings and applies them.

Qualifications

• Bachelor’s degree in a relevant field; Chemistry, Biology, Environmental science (Required)
• 5 years in technical sales, project management, or customer service experience (Required)
• 5 years’ experience in the Environmental Industry (Preferred)
• Excellent oral and written communications skills to build strong customer relationships as well as work effectively and collaborate internally (Required)
• Strong leadership, self-initiative, resource utilization (Required)
• Solid critical thinking skills to anticipate and solve problems in a systematic manner (Required)
• Advanced English language skills (Required)
• Advanced reasoning and mathematical skills (Required)
• Proficiency in Microsoft Office (Word, Excel, Outlook) (Required)

See more jobs at SGS

Apply for this job

Job Description

• In conjunction with the business strategy, identify, to deliver existing or new markets to grow the business. Ensure feasibility and successful delivery of products or services
• Assist to maintain consistent contact and provide Sales and Marketing for the stipulated Region.  
• Coordinate and support for tender preparation and submission. 
• Prepare report on Sales.
• Assist in marketing business within the stipulated Region. 
• Handle all incoming mail or issues that related with Sales/Marketing.
• Make regularly scheduled sales calls on all major customers within the region.
• Attend trade shows as required to benefit the business
• Assist the Sales/Marketing Manager to identify New Business Opportunities for development.
• Identify the New Trend of Services needed by the Client
• Analyze Market Segments
• Educate Sales Force to convey company objectives, and set up sales programs
• Develop effective presentations to create awareness for current market conditions, market trends and client’s needs.
• Ensure that all sales are conducted within clients and recognized industry health and safety regulations.
• Maintain close contact with SGS affiliates on transnational operations.
• Adherence to applicable Quality Management System by exercising necessary standard and process when carry out your responsibilities in executing, fulfilling and ensuring at all times the compliance of the QMS and is fully implemented in accordance to ISO 17020 & MIBAS policy, 17065 & ACB policy and ISO17025 & SAMM policy"(where applicable/required).
• Adherence to SGS Health, Safety and Environment (HSE) Policy by uphold a good safety behavior and exercising necessary standard and process when carry out your responsibilities at all times to ensure compliance to the HSE requirements.
• Perform any other responsibilities as assigned by your reporting manager and/or Senior Management

Qualifications

• Diploma or Degree in Engineering, Marketing, business or related field.
• Good interpersonal, presentation and communication skills, and good business acumen and the ability to adapt to the dynamic business environment
• Extensive experience in all aspects of developing and maintaining marketing strategies to meet organizational objectives.

See more jobs at SGS

Apply for this job

Job Description

The Product Manager & Lead Verifier, Greenhouse Gas will pursue and maintain technical qualifications for ISO 14064-1 Greenhouse Gas (GHG) and GHG Protocol organizational footprint family of standards as part of maintaining SGS’ larger ANAB accreditation to ISO 14065 and applicable standards. In addition, they will perform both virtual and on-site GHG verification and validation audits in the USA and Canada.

• Identify, schedule, manage, and support auditors from other affiliates and subcontractors as they perform related virtual and on-site GHG verification and validation audits on behalf of SGS in USA and Canada. 
• Participate in annual ANAB witness audits for applicable standards.
• Review and approve client questionnaires, PWS, proposals, and related technical support for related GHG verification and validation. 
• Assist auditors, key account specialists (KAS), and finance with client issues.
• Develop, enhance, and ensure delivery of quality related GHG training for internal and external resources, auditors, sales, and operations staff.
• Grow ISO 14064-1 and GHG Protocol organizational footprint market share in the USA and Canada in collaboration with marketing and sales staff. Support marketing and sales staff by developing and delivering related webinars, participating in, and sponsoring related industry trade shows, and other related activities.
• Develop, enhance, and ensure delivery of related advisory services around CDP climate scores, setting Science-Based Targets, and carbon neutrality.

Qualifications

Education and Experience
Required:

• Bachelor’s degree (preferred master’s degree) in science, environmental, engineering, or relevant discipline
• 5 years of experience with GHG standards (CARB, GHG Protocol, ISO 14064-1, TCFD, CDP)
• Earned GHG Lead Auditor (ISO 14064-1) certificate and experience qualifications as GHG Lead Auditor
• Familiarity with reporting standards and regulatory schemes that include climate disclosures (CSRD, SASB, IFRS S1 & S2, California SB, etc.)

Preferred:

• Master’s degree in science, environmental, engineering, or relevant discipline

Licenses/ Certifications

• Required valid US passport or visa and driver’s license with the ability to travel and work in the USA and Canada
• Required GHG Lead Auditor (ISO 14064-1) certificate.

Knowledge/ Skills/ Abilities

• Strong attention to detail and accuracy
• Problem solving, planning, report writing, non-compliance findings, auditing to standards.
• Ability to manage and coordinate multiple projects in a fast-paced, highly professional environment.

Computer Skills

• Required competency in using Office tools (Outlook, Excel, Word, PowerPoint)

Travel

• Travels up to 30% of the time, domestically in US and Canada.

See more jobs at SGS

Apply for this job

求人内容

国内外の様々な製品安全規格に基づき、産業用機械装置（半導体製造装置、搬送・製造・検査装置など）の安全性の審査業務を行うセーフティエンジニアのお仕事です。審査業務以外でも、量産される製品を中心に、CBスキームやNRTLに代表される認証業務や、リスクアセスメントや製品安全規格の解釈のための対外的なトレーニングやセミナーを行うこともあります。エンジニア一人ひとりがそれぞれメイン担当の規格スキルを持ちながら、新しい規格に対してもスキルを拡げることができる環境です。

今回募集をするのはSGS社内のラボで評価・試験ができない大型製造装置に対応するオンサイトチーム所属のエンジニアです。出張ベースでの業務となり、1回数日の出張が月に2~3回程度あります。

審査業務が未経験でも経験豊富な先輩社員がしっかりサポートをいたします。

また、出張業務以外はご自宅での業務が可能な為、全国からの応募を歓迎します。

【主な対象規格】
・半導体製造装置 SEMI 規格
・CEマーキング（欧州機械指令）及び関連規格
・NFPA79/UL508A をはじめとするアメリカ向け産業機器の関連規格

■やりがい
①Globalな環境
チームには外国籍社員（日本語堪能）も在籍しており、またSGS海外グループ会社とのコミュニケーションも必要な為、Globalな環境で業務をすることができます。

②常に成長できる環境　
１つの製品安全規格のスキルのみでは十分な製品の審査業務はできません。そのため弊社では製品安全規格のエキスパートを養成すべく、主担当規格以外のスキル習得のための社内講習やプロジェクト実務など一人ひとりが成長できる環境を提供しています。

■組織構成

PSチーム（PS＝Product Safety=製品安全）は2024年11月現在で約20名のメンバーが在籍しています。ラボ、オンサイト、営業スタッフが協力をして身近にある家電から産業用機械装置まで様々な製品の安全性の評価を行っています。

今回募集をするオンサイトチームには元半導体製造装置メーカー出身のマネージャーをトップに製品安全に関して以下の経験豊富なエンジニアが在籍し、あなたの成長をサポートします。

・Product Safety Business Manager　　　　　
　産業用制御装置メーカーでの設計・営業で10年の経験

・オンサイトチームマネージャー　　　　　　　
　半導体製造装置メーカーでの機械設計20年の経験

直近の３年で入社した方は産業用機械や半導体製造装置での設計経験はあるものの、規格に基づく設計経験の浅い20～30代前半の方々でした。研修期間中は２人以上の先輩社員とチームになり、業務のノウハウをオンサイトや座学でしっかりお伝えしますので審査業務が未経験の方でも安心してご応募ください。

■就業環境
連続３日程度の出張が月３回程度ございます。一週間の流れは月曜の午前はテレワーク、午後に移動（出張先は東海、近畿地方が多いです。）、火～木曜はお客様先で審査業務、そのまま夜に移動かもしくは金曜午前移動～自宅でレポート業務というパターンが多いです。

残業は月30時間程度です。

オンサイト審査（出張）以外はご自宅での業務が可能、出張先は東海・近畿地方が多い為、地方在住、Ｕターン希望の方の応募は大歓迎です。
詳細は面接にてご説明差し上げます。

■ワークライフバランス

オンとオフがはっきり。プライベートも充実できます。有給取得率は78％超（2023年実績）。入社初日に有給休暇を付与いたします。

資格

【Must haves】

・以下いずれかのご経験をお持ちの方

　　１．SEMIガイドライン（S2、S8、S22等）に基づく
　　・半導体製造装置の設計（機械、電気ハード・ソフト）の経験者
　　・半導体製造装置の安全審査の経験者

　　２．機械指令及び関連規格またはNFPA79/UL508A に基づく
　　・機械装置の設計（機械、電気ハード・ソフト）の経験者
　　・機械装置の安全審査の経験者

・宿泊出張対応が可能な方
　　※一週間の流れについては■就業環境にてご確認ください。

【Nice to haves】

・上記必須経験を3年以上お持ちの方

【English】

・TOEIC500点以上（目安の為、スコアがない方でも以下に支障がない方は歓迎します。）海外グループ会社とのメール対応やレポート作成、規格要求文書の読解及び理解に必要です。会話力のある方は歓迎します。

・無料社内 TOEIC試験 や英会話学校の費用補助などあなたの英語力ブラッシュアップを支援します。  

See more jobs at SGS

Apply for this job

Job Description

The Site Reliability Engineer will play a critical part in ensuring the reliability, supportability, scalability, and performance of our .NET stack applications built with ASP.NET MVC, Angular, and Web API.

• Partner with developers and product operations teams to understand application requirements and translate them into operational practices.
• Design, implement, and maintain infrastructure automation tools using Infrastructure as Code (IaC) methodologies.
• Monitor application health and performance metrics, proactively identifying and resolving potential issues.
• Implement incident response procedures to ensure timely resolution of outages and service disruptions.
• Establish and improve best practices for product solution design / architecture, and development.
• Participate in peer and team code reviews by developing comprehensive coding standards and guidelines to ensure consistency, maintainability, and quality in software development. By establishing clear protocols for code formatting, naming conventions, error handling, testing, and documentation, we can enhance code readability, reduce defects, and facilitate knowledge sharing among team members.
• Collaborate with engineers to develop and implement disaster recovery plans.
• Continuously improve monitoring and alerting processes to ensure efficient problem identification and resolution.
• Stay up-to-date on the latest advancements in .NET infrastructure and SRE best practices.

Qualifications

• Bachelor degree required
• Minimum 3+ years of experience in a related technical role (e.g., Systems Administrator, Network Engineer) required
• Experience with configuration management tools like Ansible, Puppet, or Chef preferred
• Azure experience required
• Familiarity with monitoring and alerting tools (.NET performance counters, Azure App Insight, Prometheus, Grafana) is a plus preferred
• Ability to manage and coordinate multiple projects in a fast paced, highly professional environment.
• While coding proficiency is not required, a strong understanding of the .NET ecosystem and a desire to delve into infrastructure and automation will be essential for success.
• Strong understanding of system administration principles, including operating systems (Windows Server preferred) and networking concepts.
• Familiarity with monitoring and alerting tools (.NET performance counters, Azure App Insight, Prometheus, Grafana)
• Ability to work independently and as part of a team

See more jobs at SGS

Apply for this job

Stellenbeschreibung

• Abnahme sowie Begutachtung von Werkstoffen im Rahmen der Druckgeräterichtlinie bzw. des AD 2000 Regelwerkes 
• Unterstützung der Herstellerbetriebe bei schweißtechnischen Fragen
• erstmalige und wiederkehrende Prüfung von Druckanlagen auf Grundlage der BetrSichV
• Sachverständigentätigkeiten in der Inspektionsstelle nach Gashochdruckleitungsverordnung
• Erstellung von Berichten und Dokumentationen entsprechend der genannten Regelwerke 

Qualifikationen

• abgeschlossenes Studium im Bereich Maschinenbau, Verfahrenstechnik oder einer anderen ingenieurwissenschaftlichen Fachrichtung
• Erfahrungen als Sachverständige*r im Bereich Druckgeräterichtlinie, BetrSichV und Gashochdruckleitungsverordnung
• sehr gute Deutsch- (C1-Niveau) und gute Englischkenntnisse (B2-Niveau)
• Reisebereitschaft sowie Führerschein Klasse B

See more jobs at SGS

Apply for this job

Descripción del empleo

¿Eres una persona Proactiva? ¿Acostumbrada a trabajar por objetivos, en entornos cambiantes, con equipos multidisciplinares? ¿Estás acostumbrado a liderar Procesos?

Si las respuestas son que SI, queremos conocerte para formar parte del equipo de Project Management de SGS, donde podrás participar en proyectos de gran envergadura y relevancia, en un equipo multidisciplinar.

Cada día es diferente, y en todas esas actividades, te animamos a que muestres tu ingenio

Tus funciones serán:

• Elaboración de planificación Maestra del proyecto.
• Gestión integral de proyecto: instalaciones de climatización, electricidad, ventilación, contra incendios y datos.
• Gestión, análisis y cierre de procesos de licitaciones
• Gestión de equipos multidisciplinares
• Elaboración de Presupuestos de inversión. Gestión, control y reporte de los mimos.
• Interlocución directa con el cliente (Propiedad). Alineamiento con sus objetivos, asesoramiento, reportes, guía y acompañamiento para consecución de sus objetivos.
• Participación en las reuniones necesarias con la Dirección, la Propiedad y demás entidades que sean precisas.
• Elaboración y control y seguimiento de Planificaciones.
• Detección de los hitos críticos de la planificación.
• Elaboración de Cuadro de Mando para el control de los procesos y la Gestión del Proyecto.
• Elaboración de informes Mensuales.
• Seguimiento de obras. Construction Management.
• Reporting a Director de Operaciones.
• Estudio de viabilidad (técnica, económica y plazos) de proyectos y obras.

Requisitos

• Grado en Ingeniería de Industrial/Técnica Industrial 

• Experiencia de al menos 3 años como Project Manager.

• Experiencia en administración de contratos y seguimiento del proyecto completo de gran envergadura.
• Dominio de normativa de Construcción.
• Dominio de programas AutoCAD, MS Office, Ms Project.
• Habilidades de negociación, comunicación y trabajo en equipo.

• Nivel de Inglés. Se valorarán otros idiomas.

Valoraremos

• Si tienes experiencia en sector hotelero y/o edificaciones terciarias (oficinas, hospitales, …)
• Si tienes experiencia en sector de plataformas logísticas
• Si tienes experiencia el sector solar o fotovoltaica
• Si dispones de conocimientos en Data Centers.
• Valoraremos tu proactividad, orientación al cliente, trabajo en equipo, orientación a resultados etc...

Nos esforzamos por contratar a las/los mejores profesionales y valoramos la integridad, la curiosidad, la excelencia, el respeto, la inclusión y la colaboración. Lo que es especial en SGS, entre otras cosas, es nuestra cultura. ¿Te apetece formar parte de una compañía líder en su sector?

See more jobs at SGS

Apply for this job

Vacatureomschrijving

Ben jij een scherpzinnige professional met oog voor detail en een passie voor techniek? Heb je ervaring met het inspecteren van goederen en ben je toe aan een nieuwe uitdaging? Dan zijn wij op zoek naar jou!

Wat ga je doen?
Als Technisch Inspecteur ben je verantwoordelijk voor de nauwkeurige controle van goederen op zowel kwaliteit als kwantiteit. Jij bent degene die ervoor zorgt dat alles klopt, van het fysiek controleren van hoeveelheden op pallets tot het verifiëren van verpakkingen en bijbehorende documenten.

Jouw taken bestaan onder andere uit:

• Het controleren van de goederen op kwaliteit.
• Bijwonen en controleren van technische inspecties door de fabrikant van de goederen.
• Inspecteren van verpakkingen en eventuele beschadigingen signaleren.
• Controleren van documentatie en waarborgen dat alle gegevens correct en volledig zijn.
• Opmaken van gedetailleerde rapporten in verband met de uitgevoerde inspecties.

Functie-eisen

Wat verwachten we van jou?
Om als technisch inspecteur goederen aan de slag te gaan heb je mbo+ werk en denkniveau. Bij voorkeur heb je een een technische opleiding gevolgd (dit is een grote pre).
Verder herken jij je in de volgende eigenschappen:

• Je werkt nauwkeurig en hebt een scherp oog voor detail.
• Je beheerst zowel de Nederlandse als Engelse taal, mondeling en schriftelijk.
• Je kunt zelfstandig werken, maar weet ook wanneer je moet schakelen met collega's.
• Je hebt affiniteit met het werken in een logistieke of industriële omgeving.

Binnen het team krijg je alle gelegenheid om jezelf te ontwikkelen. We vertellen je daar graag meer over in een persoonlijk gesprek.

See more jobs at SGS

Apply for this job

職缺說明

1.執行工程材料相關檢測、報告出具相關工作

2.依照試驗需求，執行工程材料檢驗流程等測試工作

3.相關儀器設備使用、維護及保養清潔; 確保記錄報告準確與準時

4.接受ISO17025訓練，各項安全訓練證照及TAF認證測項專業訓練

應徵資格

工作經歷:不拘

學歷要求:專科以上

科系要求:理工相關學科

語文條件:不拘

擅長工具:不拘

工作技能:不拘

其他條件

1. 對工程材料基礎試驗有興趣，可接受培訓，無經驗可。

2. 可配合平日加班及周六輪值(約4~6週一次) 

3. 基礎Office應用(Word, Excel)

See more jobs at SGS

Apply for this job

Job Description

This is a REMOTE opportunity!

Make an impact with SGS!

Our Sales team makes a difference in the lives of our customers, colleagues and community. SGS works to ensure the health and safety of our environment and community as a key partner in the cleanup of contaminated sites, ensuring we all have safe drinking water and helping clients minimize their impact on the environment. Our team's goal is to provide above and beyond client service along with industry leading technical expertise and our Account Manager team is an important part of that objective. If you're looking for an exciting opportunity in an incredible work environment with a team who is constantly looking for ways to exceed the needs of our clients, then this could be the role for you. We're looking for a motivated and energetic individual with expertise in business development and a passion for solution-based selling. This position is responsible for the sale of environmental analytical services to existing and prospected customers, as well as securing business opportunities to meet revenue targets.

Job functions:

• Manages sales team budgets, territories and client lists for clients in the Northeast USA
• Leads, coaches, and develops a quality driven, sales team to deliver profitable growth
• Collaborates with the senior management team to develop and defines sales strategies for achieving sales goals
• Hires and develops sales staff
• Defines and oversees sales staff compensation and incentive programs that motivate the sales team to achieve their sales targets
• Defines and coordinates sales training programs that enable staff to achieve their potential and support company sales objectives
• Manages customer expectations and contributes to a high level of customer satisfaction
• Defines sales processes that drive desired sales outcomes and identify improvements where and when required
• Develops infrastructure and systems to support the success of the sales function
• Provides detailed and accurate sales forecasting
• Defines, tracks, and manages sales teams KPI/Metrics; financials, activities, pipeline, prospecting
• Monitors customer, market and competitor activity and provides feedback to executive and leadership teams
• Works closely with the marketing team to establish successful support, budget, plans and programs
• Manages key customer relationships to develop and secure strategic opportunities
• Travels for in-person meetings with customers and partners and to develop key relationships and opportunities for SGS
• Develops and maintains relationships with key accounts
• Creates a culture of success and ongoing business and goal achievement
• Liaises with other SGS business lines to insure proper and effective cross selling
• Follows up on delivery of laboratory services to meet client needs
• Develops and manages the business plan for the growth of the EHS business
• Provides ongoing beneficial client feedback to inform the business and Operations staff
• Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity

Qualifications

• Degree or diploma in a relevant field; Chemistry, Biology, Environmental science (Required)
• 10 years of experience in Technical sales, project management, or customer service experience (Required)
• 10 years of experience in Environmental Industry (Preferred)
• Prior supervisory experience (Preferred)
• Ability to manage and coordinate multiple projects in a fast-paced, highly professional environment.
• Excellent oral and written communications skills to build strong customer relationships as well as work effectively and collaborate internally
• Strong leadership, self-initiative, resource utilization and time management skills
• Solid critical thinking skills to anticipate and solve problems in a systematic manner.
• Advanced English language skills
• Advanced mathematical and reasoning skills
• Advanced computer skills
• Excellent attention to detail

See more jobs at SGS

Apply for this job

Descripción del empleo

• Administración del intranet de Certificaciones: Creación de accesos, alimentación del contenido, administración de base de datos y otras funciones específicas.
• Seguimiento a clientes a través de email y/o llamada telefónica ( Inhouse y abiertos)
• Diseño de piezas publicitarias y brochure: vídeo e imagen
• Parrillas de contenido: Creación de copys
• Calendario: Programación de post orgánicos
• Benchmarking de la competencia, tendencias de contenido, formatos.
• Brindar apoyo en temas administrativos (reportes, recopilación de información)

Requisitos

• Egresado o Bachiller de Comunicaciones, Marketing, Publicidad y/o carreras afines.
• Disponibilidad para realizar prácticas profesionales durante 1 año. 
• Conocimiento de Office a nivel intermedio.
• Conocimiento de Inglés a nivel intermedio.
• Experiencia en edición de imagenes y video.
• Experiencia en manejo de redes sociales. 

See more jobs at SGS

Apply for this job

Stellenbeschreibung

• Durchführung des Datenmanagements für kosmetische Studien
• Erstellung und Programmierung von Erhebungsbögen (CRFs)
• elektronische Erfassung und Kodierung medizinischer Daten sowie Plausibilitätsprüfungen
• Erstellung und Weiterentwicklung von innovativen Prozessen zur elektronischen Datenerhebung (SOPs) 

Qualifikationen

• abgeschlossenes Studium oder Ausbildung im Bereich Datenmanagement, Biologie, Chemie, Kosmetik, Informationsmanagement oder vergleichbar
• Quereinsteiger*innen mit einer Weiterbildung im Datenmanagement arbeiten wir gerne ein
• Freude am Programmieren
• Kenntnisse in MS Excel, MS Access, SQL und VBA
• sehr gute Deutsch- und Englischkenntnisse (C1)

See more jobs at SGS

Apply for this job

Stellenbeschreibung

• Verantwortung und strategische Entwicklung des Bereiches Güteprüfung Paletten und Ladungsträger
• Kundenbetreuung, Akquise und Ausbau bestehender Geschäftsbeziehungen
• Durchführung und Kontrolle von Projekten inklusive Auftragscontrolling
• Sicherstellung der Servicequalität und Einhaltung von Service Level
• Überwachung der Rechnungsstellung und Prüfung von Lieferantenrechnungen

Qualifikationen

• abgeschlossenes kaufmännisches Studium; alternativ abgeschlossene kaufmännische Berufsausbildung gepaart mit Berufserfahrung im beschriebenen Aufgabengebiet
• sehr gute Deutsch- (C1-Niveau) und gute Englischkenntnisse (B2-Niveau)
• idealerweise mehrjährige Berufserfahrung in der Güteprüfung von Paletten und Ladungsträger
• Führerschein Klasse B sowie Bereitschaft zu gelegentlichen Reisen (ca. 5%)

See more jobs at SGS

Apply for this job

Job Description

Please note that this is a remote position. Travel is frequent about 60% or more.

Make an impact with SGS!

Our Sales team makes a difference in the lives of our customers, colleagues and community. SGS works to ensure the health and safety of our environment and community as a key partner in the cleanup of contaminated sites, ensuring we all have safe drinking water and helping clients minimize their impact on the environment. Our team's goal is to provide above and beyond client service along with industry leading technical expertise and our Account Manager team is an important part of that objective. If you're looking for an exciting opportunity in an incredible work environment with a team who is constantly looking for ways to exceed the needs of our clients, then this could be the role for you. We're looking for a motivated and energetic individual with expertise in business development and a passion for solution-based selling. This position is responsible for the sale of environmental analytical services to existing and prospected customers, as well as securing business opportunities to meet revenue targets.

Job functions:

• Manages sales team budgets, territories and client lists for clients in the Northeast USA
• Leads, coaches, and develops a quality driven, sales team to deliver profitable growth
• Collaborates with the senior management team to develop and defines sales strategies for achieving sales goals
• Hires and develops sales staff
• Defines and oversees sales staff compensation and incentive programs that motivate the sales team to achieve their sales targets
• Defines and coordinates sales training programs that enable staff to achieve their potential and support company sales objectives
• Manages customer expectations and contributes to a high level of customer satisfaction
• Defines sales processes that drive desired sales outcomes and identify improvements where and when required
• Develops infrastructure and systems to support the success of the sales function
• Provides detailed and accurate sales forecasting
• Defines, tracks, and manages sales teams KPI/Metrics; financials, activities, pipeline, prospecting
• Monitors customer, market and competitor activity and provides feedback to executive and leadership teams
• Works closely with the marketing team to establish successful support, budget, plans and programs
• Manages key customer relationships to develop and secure strategic opportunities
• Travels for in-person meetings with customers and partners and to develop key relationships and opportunities for SGS
• Develops and maintains relationships with key accounts
• Creates a culture of success and ongoing business and goal achievement
• Liaises with other SGS business lines to insure proper and effective cross selling
• Follows up on delivery of laboratory services to meet client needs
• Develops and manages the business plan for the growth of the EHS business
• Provides ongoing beneficial client feedback to inform the business and Operations staff
• Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity

Qualifications

• Degree or diploma in a relevant field; Chemistry, Biology, Environmental science (Required)
• 10 years of experience in Technical sales, project management, or customer service experience (Required)
• 10 years of experience in Environmental Industry (Preferred)
• Prior supervisory experience (Preferred)
• Ability to manage and coordinate multiple projects in a fast-paced, highly professional environment.
• Excellent oral and written communications skills to build strong customer relationships as well as work effectively and collaborate internally.
• Strong leadership, self-initiative, resource utilization and time management skills.
• Solid critical thinking skills to anticipate and solve problems in a systematic manner.
• Advanced English language skills
• Advanced reasoning and mathematical skills  
• Advanced computer skills
• Strong attention to detail

See more jobs at SGS

Apply for this job

Stellenbeschreibung

• Koordination, Steuerung und fachliche Unterstützung unserer Werkstoffprüfer*innen auf der Baustelle
• Abstimmung mit allen beteiligten Stellen z.B. Bauherr, TÜV, Rohrleitungsbau, Schweißtechnik etc.
• eigenständige Durchführung von Prüfungen in den gängigen Prüfverfahren (PT, MT, RT, UT, VT)
• Begleitung des gesamten Prüfprozesses bis zur abrechnungsfertigen Grundlage

Qualifikationen

• Zertifizierung in den gängigen Prüfverfahren (PT, MT, RT, UT, VT) mindestens der Stufe 2
• idealerweise Erfahrungen und Kenntnisse in den Verfahren ToFD und Phased Array sowie automatisierte Ultraschallprüfung
• mehrjährige Erfahrung in der Durchführung zerstörungsfreier Werkstoffprüfungen unter Montagebedingungen
• Führerschein Klasse B sowie Reisebereitschaft (ca. 75%)
• sehr gute Deutschkenntnisse in Wort und Schrift (min. C1-Niveau) und gute Englischkenntnisse (B2 Niveau)

See more jobs at SGS

Apply for this job